Sprinkler valve won't shut off? Causes, fixes and what a valve job costs
A valve that will not shut off is usually debris, a worn diaphragm or a stuck solenoid. Valve replacement runs $275 to $1,200 by type and size.
Short answer: a sprinkler valve that will not shut off is usually held open by grit, a worn diaphragm or a stuck solenoid. Valve replacement runs $275 to $1,200 depending on type and size on our price list. Locating a buried valve is a separate charge, from $185.
What the symptom looks like
One zone runs all the time, or it trickles after the controller says it is done. You may see a soggy patch, a head weeping in the same spot, or a water bill that jumped. The valve is the gate for that zone. When the gate will not close, water keeps flowing.
If the water comes only from one zone and keeps coming even with the controller off, the valve is the first suspect.
Why valves stick open
- Debris in the valve. A bit of grit, sand or a pebble can sit under the diaphragm and keep it from sealing. Georgia clay and well-worn pipe shed plenty.
- A torn or worn diaphragm. The rubber disk that seals the valve gets old and stops closing tight.
- A stuck solenoid. The small electric plunger on top holds the valve shut or open. If it sticks, the valve may not close.
- A manual bleed screw left open. Someone turned it to flush the line and did not turn it back.
- Constant power from the controller or a wire fault. A zone that stays energized can look like a valve problem when it is a wiring problem.
What to check first
- Turn the controller off at the display. If the zone stops, the controller was calling it.
- Check that the schedule does not include a long run time you forgot.
- Open the valve box and look for the bleed screw and solenoid. Turn the solenoid a quarter turn counterclockwise by hand only if you are comfortable, to see if water changes.
- If the water still flows, shut the system off at the isolation valve to stop the loss.
Do not force anything with a wrench. A cracked body means a full replacement.
What a valve job costs
| Job | Price | Based on |
|---|---|---|
| Valve replacement | $275 – $1,200 | price list, by type and size |
| Valve locating | from $185 | price list |
| Minimum service call | $95 | price list |
Where a job lands in that range depends on valve type, size, whether several valves were done in one visit, and whether we could find the valve at all.
Why locating is a separate charge
Valve boxes get buried under mulch and sod, and some systems have no box. Finding a valve takes time and equipment, and the time spent is not repair time. We charge it separately and plainly. The easiest way to avoid it is to know where your boxes are. Take photos and keep them with the house records. If a prior installer left a map, keep it.
Repair or replace
If the problem is debris or a worn diaphragm, a repair kit may be enough. If the body is cracked or the valve is old and failing, replacing it is cheaper than repeating the visit. We find the cause rather than replacing parts until it stops, so we will tell you which case you have.
When to call us
Call when a zone will not shut off, when you cannot find the valve, or when water is rising around a valve box. We are licensed and insured, and our own crew does the work. See the irrigation page, pricing or request a quote.
FAQ
Why won't my sprinkler valve shut off? Usually grit under the diaphragm, a worn diaphragm or a stuck solenoid. A wiring fault can also keep a zone energized.
How much does it cost to replace a sprinkler valve? $275 to $1,200 on our price list, depending on type and size.
Why is valve locating extra? Finding a buried valve is its own job, from $185. Knowing where your valve boxes are avoids it.
Can I fix a stuck valve myself? Sometimes. Turn the zone off, check the bleed screw and clean debris if you are comfortable. If it still leaks, call.
Prices from our price list. Updated November 2026.